Toro Commercial 3000 Series 60" 25HP EFI 747cc (74958)
Z Master Commercial 3000 Series mowers deliver impressive commercial-grade results and durablity, all at an outstanding value. Powerful commercial-grade 25 HP Kohler® Command Pro EFI 747cc engine with 60" TURBO FORCE deck. MOdel shown 74956.
- Professional quality performance from the 25 HP Kohler® Command Pro EFI 747cc Engine
- 60 in (152 cm) TURBO FORCE deck features heat-treated steel blades and our patented adjustable discharge chute, nothing cuts as fast or as well
- Superior Fuel Economy - up to 25% better fuel economy than equivalent carbureted engines
- Super fast 18,300+ ft./min blade tip speed, high-lift, flex-resistant 1/4" thick heat-treated steel blades
- Exclusive TURBO FORCE Deck: High-capacity TURBO FORCE decks deliver unsurpassed strength, a superior cut, and increased productivity in extreme mowing conditions. Equipped with a patented adjustable baffle, TURBO FORCE decks can be fine-tuned in order to conquer changing turf conditions.
- 7-Gauge, High-Strength Steel: The TURBO FORCE deck is constructed of 7-gauge, high-strength steel which is 33% thicker and 32% higher in yield strength than ordinary 10-gauge commercial steel used in 7/10 decks. The combined effect is 75% stronger, so it easily handles the most demanding conditions and resists damage from impacts and abrasion.
- Deluxe Suspension Seat: Deluxe suspension seat features thick cushions, large bolsters and 3-D isolator mounts that absorb bumps and vibrations to reduce operator fatigue.
- Industry's Toughest Spindle Assemblies: Toro's rugged spindle assemblies survive impacts that would destroy lesser spindles. A stout cast iron housing with a massive base and six mounting bolts absorbs impact loads and distributes them across a broader area of the deck shell. Plus, the solid, one-inch diameter shaft is alloy steel, not the common lower-grade steel used in many competitive models. 72" Deck will have tapered bearing only.
- A Flat Crisp Cut with Precision Blades: (.250) thick precision blades resist flexing to provide a flat, crisp cut. High-strength, heat-treated alloy steel survives impacts and provides resistance to the rapid wear commonly associated with abrasive conditions. Options include Recycler® and Atomic® mulching blades, medium sail Bahai blades, and low sail sand blades.
- Rubber Discharge Chute: High performance rubber discharge chute allows for close trimming without damaging chute or landscape structures. Patented design provides exceptional clipping dispersion.
- Rugged Frame: A commercial-grade carrier frame, constructed of 3" x 1.5" tubular steel, supports the cutting deck and stands up to the rigors of professional use.
- Folding Rollover Protection System ROPS: A Rollover Protection System (ROPS), complete with seat belt, comes standard for operator protection in the case of accidental rollovers and tipovers. In situations where sufficient vertical clearance is not available, such as loading on an enclosed trailer, the ROPS can be temporarily unlocked and folded down.
- Engine: 25 hp Kohler® Command Pro EFI 747cc
- Fuel Capacity: Gasoline - 8 gallons
- Adjustable Discharge Baffle: Standard
- Air Filter: Heavy-Duty Canister
- Anti-Scalp Wheels: 4 Standard, 1 Optional
- Blade Tip Speed: 18,300+ ft/min (5,577.8 m/mim)
- Blade Type: .25 in (.6 cm) thick heat-treated steel
- Carrier Frame: 3" x 1.5" x 10 gauge
- Caster Tires: 13" x 6.5"-6" pneumatic
- Deck Design: 7-gauge 60 in (152 cm) TURBO FORCE® w/bull-nose bumper
- Discharge Chute: Rubber
- Drive Tires: 24" x 12" - 12"
- Ground Speed: 10 mph forward
- Height of Cut: 1.0" -5.5" in 0.25" increments
- Hour Meter: Standard
- Hydraulic Fluid: Premium synthetic
- Ignition: Electric Start, Standard
- ROPS: Folding; standard
- Seat: Premium Bolstered
- Spindle Bearings: Greasable ball bearings
- Spindle Housing: 9" diameter cast iron
- Steering Controls: 1-5/8" diameter grips; adjustable, dampened
- Engine Manufacturer
- Engine Type
- 25 hp Command Pro EFI
- Wheel Size
- 24 in. x 12 in. - 12 in.
- Fuel Capacity
- 8 gal.